libvirt-daemon-config-network-6.2.0-64.oe2203sp3 0 >
fU ;G|`u` I X
Lt>מ,`OQr!$ .ws%% k⌼ NQ[[λ Hf/BK->С_iꜴQP~tɮF'U.:93kS0> {8 _]J#18+dr(09pB}n2 } ^g<2#kymJfl{~Բ%]w9 -feؘ![m >NکIKx{K
QzM l=FrJRȊof٧СLgc,R{z Zlhj[QۡczP2[/K˝i\}: [v8 ޛ[E2c0b17cb4b4883dbfad55fbf273b7cd4297e34ef 57eb760059178949dccbd8bdf3e07630431ff723a39299b58092be0e43a0588f %Li Ws > > ? d & 3 g
, @ T x ( 8 9 D :
> F G H ( I 8 X < Y D \ l ] | ^ b d e f l t 0 u @ v P z f v $ * l p C libvirt-daemon-config-network 6.2.0 64.oe2203sp3 Default configuration files for the libvirtd daemon Default configuration files for setting up NAT based networking fUًdc-64g.compass-ci
LGPLv2+ http://openeuler.org Unspecified https://libvirt.org/ linux aarch64 if test $1 -eq 1 && test ! -f /etc/libvirt/qemu/networks/default.xml ; then
# see if the network used by default network creates a conflict,
# and try to resolve it
# NB: 192.168.122.0/24 is used in the default.xml template file;
# do not modify any of those values here without also modifying
# them in the template.
orig_sub=122
sub=${orig_sub}
nl='
'
routes="${nl}$(ip route show | cut -d' ' -f1)${nl}"
case ${routes} in
*"${nl}192.168.${orig_sub}.0/24${nl}"*)
# there was a match, so we need to look for an unused subnet
for new_sub in $(seq 124 254); do
case ${routes} in
*"${nl}192.168.${new_sub}.0/24${nl}"*)
;;
*)
sub=$new_sub
break;
;;
esac
done
;;
*)
;;
esac
UUID=`/usr/bin/uuidgen`
sed -e "s/${orig_sub}/${sub}/g" \
-e "s,,\n $UUID," \
< /usr/share/libvirt/networks/default.xml \
> /etc/libvirt/qemu/networks/default.xml
ln -s ../default.xml /etc/libvirt/qemu/networks/autostart/default.xml
# libvirt saves this file with mode 0600
chmod 0600 /etc/libvirt/qemu/networks/default.xml
# Make sure libvirt picks up the new network defininiton
mkdir -p /var/lib/rpm-state/libvirt || :
touch /var/lib/rpm-state/libvirt/restart || :
fi A큤 fUfUfUfU a3f67a652ed4f77d2b202ef8eabcc08f80c452ea06532c73780b144bf688877a ../default.xml @ @ root root root root root root root root libvirt-6.2.0-64.oe2203sp3.src.rpm libvirt-daemon-config-network libvirt-daemon-config-network(aarch-64)
/bin/sh /bin/sh libvirt-daemon libvirt-daemon-driver-network rpmlib(CompressedFileNames) rpmlib(FileDigests) rpmlib(PayloadFilesHavePrefix) rpmlib(PayloadIsXz) 6.2.0-64.oe2203sp3 6.2.0-64.oe2203sp3 3.0.4-1 4.6.0-1 4.0-1 5.2-1 4.17.0 fP@f@e@eg'e RddldkY@djdGd,@d%yd"cwcj@c@ctc.c@cn9@cc@cEZcd@b@ba@b&jiangjiacheng - 6.2.0-64 caozhongwang - 6.2.0-63 jiangdongxu - 6.2.0-62 Jiabo Feng - 6.2.0-61 lixianglai - 6.2.0-60 Jiabo Feng - 6.2.0-59 laokz - 6.2.0-58 zhangxinhao - 6.2.0-57 XuFei - 6.2.0-56 tianyuan - 6.2.0-55 Chenxi Mao - 6.2.0-54 zhaotianrui - 6.2.0-53 mayunlong - 6.2.0-52 mayunlong - 6.2.0-51 jiangjiacheng - 6.2.0-50 zhengchuan - 6.2.0-49 yezengruan - 6.2.0-48 yezengruan - 6.2.0-47 yezengruan - 6.2.0-46 yezengruan - 6.2.0-45 yezengruan - 6.2.0-44 wengyu - 6.2.0-43 yezengruan - 6.2.0-42 yezengruan - 6.2.0-41 yezengruan - 6.2.0-40 yezengruan - 6.2.0-39 - util: keep track of full GSource object not source ID number
- rpc: mark source returned by virEventGLibAddSocketWatch as unused
- rpc: ensure temporary GSource is removed from client event loop (CVE-2024-4418) - interface: fix udev_device_get_sysattr_value return value check (CVE-2024-2496)
- remote: check for negative array lengths before allocation (CVE-2024-2494)
- vish:Fix off-by-one error in udevListInterfacesByStatus (CVE-2024-1441) - vdpa: Release pci slot address when unplugging vdpa device
- vdpa: return pcieFlags when calculate vdpa passthrough devices. - vdpa: support vdpa device migrate
- vdpa: support vdpa device hot plug/unplug
- vdpa: Introduce the new device type vdpa to hostdev
- node_device: fix leak of DIR*
- Include vdpa devices in node device list
- lxc: fix lxcContainerMountAllFS() DEREF_BEFORE_CHECK
- qemu: Return perf status that affect next boot for shutoff domains While we set up perf events for a shutoff domain and check the settings, All of perf events are reported as 'disabled', unless we add --config, This is redundant for a shutoff domain.
- tests: upstream Fixing compiler warning in cputest
- qemu_migration_cookie: Rename ret in qemuDomainExtractTLSSubject
- virrandom: Fix printf format string in virRandomGenerateWWN()
- fix the issue of errors when saving after 'virsh edit'
- Use (un)signed printf specifiers correctly
- admin: fix leak of typed parameters on error
- esx: call freeaddrinfo earlier in esxUtil_ResolveHostname Call freeaddrinfo() as soon as @result is not needed anymore, i.e. right after getnameinfo(); this avoids calling freeaddrinfo() in two branches.
- qemu: Fix incorrect command name in error messages - Fixed loongarch qxl device not displaying during startup phase
- Synchronize upstream patches "Use correct tpm device for all non-x86" - virnetsshsession: Adapt to change libssh2 API
- selinux: Reflect context_str() type change
- Revert "selinux: adapt to libselinux"
- selinux: adapt to libselinux
- fix error in printf format string - add riscv64 support - cpu_topo: support for cpu_topo "clusters” in conf
- cpu_topo: support for specifying "clusters" in qemu comand
- cpu_topo: support for reporting cluster_id in NUMA topology
- cpu_topo: fix detection of vCPU pids when multiple clusters are present - nodedev: ignore EINVAL from libudev in udevEventHandleThread
- qemu: tpm: Pass --logfile to swtpm_setup for incoming migration - bugfix: Fix potential crash during driver cleanup - bugfix: Fix build error if compiler switch to clang. - bugfix: correct the firmware path of loongarch virt machine - bugfix: move qemuDomainDiskBlockIoTunelsSupported to currect place
- libvirt: add loongarch support - live_migrate: virsh migrate command supports the zstd compression algorithm
- glibcompat: Provide implementation for G_GNUC_NO_INLINE - backport patches from upstream - add function of set migration thread affinity during migration - update the Chinese translation of nwfilter - sync some bugfix patches from upstream
- support vhostuser disk
- libvirt: support dirtyrate (calc-dirty-rate, dirtyrate-param.mode) - sync some bugfix patches from upstream - docs: Fix template matching in page.xsl - libvirt: support migration dirtyrate - libvirt: Synchronize upstream patches according to issue I5OLYY - qemu: Add missing lock in qemuProcessHandleMonitorEOF (CVE-2021-3975) - apibuild: Fix self.waring method call - nwfilter: fix crash when counting number of network filters (CVE-2022-0897) - sw_64: Add sw64 architecture support
- src: workaround warning triggered in glib 2.69 /bin/sh dc-64g.compass-ci 1716902283 6.2.0-64.oe2203sp3 6.2.0-64.oe2203sp3 default.xml default.xml networks default.xml /etc/libvirt/qemu/networks/autostart/ /etc/libvirt/qemu/networks/ /usr/share/libvirt/ /usr/share/libvirt/networks/ -O2 -g -pipe -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fstack-protector-strong -grecord-gcc-switches -specs=/usr/lib/rpm/generic-hardened-cc1 -fasynchronous-unwind-tables -fstack-clash-protection cpio xz 2 aarch64-openEuler-linux-gnu ASCII text directory yĵ/u?6if [ -f /var/lib/rpm-state/libvirt/restart ]; then
/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || :
fi
rm -rf /var/lib/rpm-state/libvirt || : /bin/sh utf-8 c4058c1076fb0a707688c1835a2657eea4e85f11e7b0d488686b297ab9b57beb 2f53eeca240a837f1c51ea3bab22e68c31cb3c63b322a5d65c1c4ee6a704ec40 ? 7zXZ
! #, ]
b2q1
֏kc,|A=7ǭCF)L^ okNd
Cӻ̷c.#\p|S=T552Q@~'}2 "1G'F
e ʯh<[ g ;!lӦjreBV1M .|y&̂#yN:()n? .8 /S$
Q;"1